HD205P

152 kW
Engine Power
200 kN
Extraction Force
200 kN
Crowd Force
60000 Nm
Rotary Head Torque
10200
Stroke of Rotary
610
Clamp Diameters
30 RPM
Rotary Head Max Drilling Speed
35.5 T
Operating Weight
2260 MM
Width Of Crawer

ABOUT
TECHINCAL

Introduction

The HD205P is the same class of machine as the HD200, but is configured for mainly vertical piling and predrilling applications. The longer mast is capable of handling 9m (30′) rods and a wide range of high torque rotators (up to 6000 kgm torque) are available for most applications. It is especially suited for large diameter DTH hammer applications and incorporates a built in shock absorption system.

– Weight = 35.5 tons (78,100 lbs)
– Power = 152 kw (204 HP)
– Rotator max. torque = 60,000 Nm (43,380 ft.lb)
(Equipped with HR6000 rotator)
– Feed max. force = 20 tons (44,000 lb)
– Pullback max. force = 20 tons (44,000 lb)

Applications :
* Large Diameter DTH Drilling
* Large Diameter Augering
* Rotary Drilling (Tricone Bits and Drag Bits)

SPECIFICATION	VALUE
Standard Specification	HD205P Hydraulic Foundation Drill
Service Weight	500 kg (78,100 lb)
Drive	Diesel Engine
Power Rating	152 kW (204 HP) @ 2,000 rpm
Hydraulic System	Variable Displacement Pump + Gear Pump
Max. Pressure	240 Bar (3480 psi)
Hydraulic System Flow Rates
Q1	168 l/min. (44.3 gpm)
Q2	168 l/min. (44.3 gpm)
Q3	105 l/min. (27.7 gpm)
Q4	38 l/min. (10 gpm)
Q5	38 l/min. (10 gpm)
Q6	38 l/min. (10 gpm)
Hydraulic Oil Tank Capacity	550 l (145 gal)
Fuel Tank Capacity	300 l (79 gal)
Mast And Feed Assembly
Mast Length	12,418 mm (40.7ft)
Stroke Length	10,200 mm (33.5ft)
Feed Force	20,000 kg (44,000 lb)
Pullback Force	20,000 kg (44,000 lb)
Feed Speed	0.32 m/s (63 ft/min)
Retract Speed	0.32 m/s (63 ft/min)
Rotator
Model	HR6000
Rotary Speed (max.)	30 rpm
Torque (max.)	58,300Nm (42,100 ft. lb)
Winch
Lifting Force	10,300 kg (22,800 lb)
Line Speed	29.8 m/min (97.7 ft/min)
Wire Size	Dia. 25 mm (1”)
Clamp
Model	MOD175B
Clamping Dia. (max.)	610 mm (24”)
Crawler Undercarriage
Ground Pressure	0.86 kg/cm2 (12.2