HD110-3

106 kW
Engine Power
51 kN
Extraction Force
27 kN
Crowd Force
24000 Nm
Rotary Head Torque
4100
Stroke of Rotary
273
Clamp Diameters
60 RPM
Rotary Head Max Drilling Speed
12.5 T
Operating Weight
2070 MM
Width Of Crawer

TECHNICAL

Introduction

The HD110-3 is designed with swing boom. The feature allow it to work in limited access job site. The high-torque rotator (up to 2340kgm or 16850 ft.lb torque) make it suitable for micropile and DTH drilling application.
With the optional feature, “side swing device”, the rig will have some more movements for better drilling positions, and the “mast extension” enables the rig to drill with 6m, 20ft., long drill rod, increasing the productivity.

– Weight = 12.5 tons (27,560 lbs)
– Power = 106 kw (142 HP)
– Rotator max. torque = 24,000 Nm (17,352 ft.lb)
(Equipped with HR2400 rotator)
– Feed max. force = 8 tons (17,600 lb)
– Pullback max. force = 8 tons (17,600 lb)

Applications :
* Drifter Drilling
* DTH Drilling
* Augering
* Rotary Drilling (Tricone Bits and Drag Bits)
* Coring

HD3500 Technical Specifications
General
Service Weight	Approx. 12,500 kg [27,560 lb]
Drive	Diesel Engine, Power Rating = 106 kW (142HP) @ 2,200 rpm
Hydraulic System
Hydraulic System	Variable Load Sensing Pump + Gear Pump, Max Pressure 250 Bar [3625 psi] Q1 = 168 l/min. [44.3 gal(us)/min] Q2 = 168 l/min. [44.3 gal(us)/min] Q3 = 38 l/min. [10 gal(us)/min] Q4 = 26 l/min. [6.9 gal(us)/min]
Hydraulic Oil Tank Capacity	320 l [84.4 gal (us)]
Fuel Tank Capacity	170 l [44.9 gal (us)]
Mast And Feed Assembly
Mast Length	6,000 mm [19.7’]
Stroke Length	4,100 mm [13.5’]
Feed Force	8,000 kg [17,640 lb]
Pullback Force	8,000 kg [17,640 lb]
Feed Speed	0.73 m/s [2.4 ft/s]
Retract Speed	0.73 m/s [2.4 ft/s]
Other Components
Rotator (HR2400)	Rotary Speed Torque (kgm) Toque (ft lb) Stage 1 Stage 2 Stage 3 Stage 4 : 18 rpm 37 rpm 33 rpm 67 rpm : 2,436 kgm 1,218 kgm 1,948 kgm 974 kgm : 17,619 ft lb 8,810 ft lb 14,090 ft lb 7,045 ft lb
Winch	Lifting Force Line Speed Wire Size Drum Capacity : 2345 kg [5,170 lb] : 23.4 m/min [76.8 ft/min] : Ø 12 mm [0.47”] : 46 m [151 ft]
Hydraulic Double Clamp	Model Clamping Force Clamping Range Break-out Torque : MOD176A : 23,000 kg [50,705 lb] : Ø 50 to Ø 273mm [2.5” to 10.75”] : 3,074 kgm [32,545 ft lb] (Bigger clamp is possible upon request)
Undercarriage and Transportation
Crawler Undercarriage Specific Ground Pressure	0.73 kg/cm2 [10.38 psi]
Max. Travelling Speed	0-1.5 km/h [0.93 mph]
Climbing Ability	20°
Dimensions (while mast down to horizontal)
Length	7,720 mm [25.3 ft]
Width	2,230 mm [7.3 ft]
Height	3,140 mm [10.3 ft]