C3V XP-2

The C3V XP-2 is based on Casagrande's smallest multipurpose drilling rig, designed for vertical pilling and drilling.

90 kW
Engine Power
120 kN
Extraction Force
7.7 T
Operating Weight

Product Catalogue C3V-XP-2-Casagrande-Hydraulic-Crwawler-Drill

download

About
Technical

Introduction

The C3V XP-2 represents the product of 60 years of Casagrande’s experience in the field of drilling, together with a long history of innovation successes.

The Smart Power Management (SPM) is a intelligent engine power management system that improves machine performances and productivity. The SPM system monitors power flows and allocates maximum available power to the required function.

The XP-2 control system offers the following advantages for the operator and the supervision of the work: monitoring of all working function, diagnostic of the working systems to ensure the constant monitoring of the status of sensors and components, easy conversion in any drilling arrangement, friendly customization of working functions e.g. mappings of torque and speed for EP rotary head, remote rigs assistance, diagnostic, monitoring of working parameters with the new Casagrande FleetMaster online platform.

PERFORMANCE AND PRODUCTIVITY

The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power flows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.

FULL LOAD SENSING TECHNOLOGY

The XP hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic
managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).

SAFETY & TECHN€OLOGY

The C3V XP-2 has a very low sound emission level as a result of the of sound-absorbing materials and smart oil heat exchangers where fan speed is related to the oil temperature reducing fuel consumption and the overall noise level. The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations.

FLEXIBILITY

Technical Data
Electric Motor	90 kW
Width of crawler	1100 ÷ 1580 mm

MAST
Stroke of rotary head	1900 ÷ 3500 mm
Extraction force	120 kN
Crowd force	120 kN

CLAMPS
Diameters	30 ÷ 305 mm

ROTARY HEAD
Torque	15200 Nm
Max. Drilling speed	360 rpm

WEIGHT
Weight in working condition	7700 kg

Optional Equipment

Other rotary heads available
Drifter T40 (Back Device)
Rotary head side movement
Hydraulic chuck type P114 for jet grouting
Balancing kit – crowd/drilling feed
Jet grouting system without mast extensions
Auxiliary winch with rope Max line pull 900 kg / 2000 kg
Cathead for auxiliary winch
Flushing pump-Water pump: GAMMA 62 (60 l/min max – 50 bar max) GAMMA 202 (200 l/min max – 60 bar max)
Pump CC30/20S Foam: (30 l/min max – 50 bar max) High pressure: (30 l/min max – 200 bar max)
Mud pump NG 530 L (170 l/min max – 24 bar max)
Lubricator for down-the-hole hammer 8,5
Electric fuel pump
Cable remote control / Radio remote control for tracking
Additional sound prooﬁ ng bafﬂes
Safeguards according to EN 16228
Lifting kit
Casagrande FleetMaster remote rig control and monitoring via internet