C6T XP-2
C6T XP-2-
142 kWEngine Power
-
50 kNExtraction Force
-
50 kNCrowd Force
-
15210 NmRotary Head Torque
-
3000-5500
Stroke of Rotary
-
32-254
Clamp Diameters
-
500 RPM
Rotary Head Max Drilling Speed
-
16 T
Operating Weight
-
1200-1600 MMWidth Of Crawer
-
25 DegreesIncline Drilling Capable
-
Y
Jet Grout Capable
-
70-90 kW
Optional Electric Power
-
3760 MM
Horizontal Drill Radius
-
5855 MM
Max Horizontal Drill Height
- about
- technical
- options
INTRODUCTION
The Casagrande C6TXP-2 is a hydraulic drill rig with innovative
kinematic that allows tunnelling drilling operations as forepoling,
rock bolts and tunnel invert as well as constructing anchors,
micropiles and jet grouting treatments.
Designed and built using the latest state of the of art technology.
A machine engineered for the most demanding conditions with
particular emphasis on performance efficiency, reliability and
economy
Performance and Productivity
Comfort and Technology
The radio remote control is ergonomically designed with reduced weight and dimensions for user comfort. It uses the latest technology for reduced response time and more effective operations. Smart oil heat exchangers reduce fuel consumption and the overall noise level of the cooling system.
Safety and Maintenance
The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations.
Environment Awareness
Rigs are powered by the latest generation Stage V diesel engine with reduced exhaust emissions and use of low sulfuric content fuels. Further reduction of CO2 emissions is achievable by using HVO plant-based fuels. Bio-oils of high efficiency and performance are available.
Technical Data |
|
|---|---|
| Engine power | 142 kW |
| Operating weight | 16000 kg |
| Undercarriage width | 2250 mm |
MAST |
|
| Mast length / Stroke of rotary head | 5500 / 4000 mm, 4500 / 3000 mm |
| Extraction / Crowd force | 50 kN |
| Extraction / Crowd speed | 55 (76) m/min |
CLAMPS |
|
| Diameter | 40 ÷ 159 mm, 32 ÷ 254 mm |
| Clamping force | 157 kN, 159 kN |
ROTARY HEAD |
|
| Max. torque | 1650 Nm, 5000 Nm, 12200 Nm, 15210 Nm |
| Max. speed | 145 rpm, 174 rpm, 500 rpm, 400 rpm |
BASIC EQUIPMENT
- Other rotary heads available
- Drifter type T40 for T14EP and T20EP
- Off hole slide of rotary head (overall dimensions change)
- Auxiliary winch with rope – Max line pull 1000 kg – 2000 kg
- Cathead for auxiliary winch
- Auxiliary crane
- Jet grouting system
- Hydraulic chuck type P114 for jet grouting rods
- Flushing pump – Water pump GAMMA 62 (60 l/min max – 50 bar max) GAMMA 202 (200 l/min max – 60 bar max)
- Pump CC30/20S Foam: (30 l/min max – 50 bar max) High pressure: (30 l/min max – 200 bar max)
- Mud pump NG530 L (215 l/min – 24 bar) | NG600 L (310 l/min – 24 bar) NG800 L (480 l/min – 20 bar)
- Mud and slurry pump: Triplex 90 (90 l/min max – 45 bar max) Triplex 200 (200 l/min max – 45 bar max) Triplex 300 (300 l/min max – 35 bar max)
- Water, mud and cement pump STA T60 (600 l/min max – 40 bar max)
- Lubricator for down-the-hole hammer 8,5 l – 20 l
- Manual centralized greasing system
- Remote control or radio remote control for tracking and positioning
- Safeguards according to EN 16228
- CDR – Casagrande Data Recording system for working parameters and recording
- Casagrande FleetMaster remote rig control and monitoring via internet
| 2 RODS LOADER | ||
|---|---|---|
| Feature | Mast 3000 | Mast 4000 |
| Max. rods length | 2000 mm | 3000 mm |
| Capacity | 2 rods | 2 rods |
| Rod diameter | 76 ÷ 101 mm | 76 ÷ 101 mm |
| Weight of rods loader | 250 kg | 250 kg |
| Max. weight of rods | 120 kg | 120 kg |
| Max. depth | 7 (4+3) | 10 (6+4) |
| 1 ROD LOADER | ||
|---|---|---|
| Feature | Mast 3000 | Mast 4000 |
| Max. rods length | 2000 mm | 3000 mm |
| Capacity | 1 rod | 1 rod |
| Rod diameter | 22 ÷ 45 mm | 22 ÷ 45 mm |
| Weight of rods loader | 125 kg | 125 kg |
| Max. weight of rods | 35 kg | 35 kg |
| Max. depth | 5 (2+3) | 7 (3+4) |
