Skip to content
+44 (0)1296 651043

C8 XP-2

C8 XP-2 has been designed with increased stability and power to tackle the larger projects in the field of foundation and is suited to the construction of anchors, micropiles and jet-grouting.
  • 209 kW

    Engine Power

  • 86.5 kN

    Extraction Force

  • 23 T

    Operating Weight

Catalog icon
Product Catalogue C8XP-2 Brochure
download
  • about
  • technical

INTRODUCTION

The new Casagrande drill rig C8 XP-2 has been designed and manufactured with increased stability and power to tackle the larger projects in the field of foundation and is suited for constructing anchors and micropiles and is particularly suited to jet-grouting.

Thanks to a new joints system, the C8 XP-2  is a rapid machine to operate, easy to use (user-friendly). Total control flexibility is due to the new joints system, allowing the C8 XP-2 to reach the most extreme locations.

The SPM – Smart Power Management – and the full load sensing hydraulic system allow an intelligent engine power management to improve performance of the machinery and reduce fuel consumption. Available in hydraulic and full radio-controlled version, the new C8 XP-2 is designed thinking of the operator.

PERFORMANCE AND PRODUCTIVITY

The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power flows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.

 

SAFETY & TECHNOLOGY

The C8XP-2 has a very low sound emission level as a result of the of sound-absorbing materials and oil heat exchangers, designed for reducing the overall noise level. The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations.

FULL LOAD SENSING TECHNOLOGY

The XP hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).

FLEXIBILITY

The XP control system offers the following advantages for the operator and the supervision of the work: monitoring of all working function, diagnostic of the working systems to ensure the constant monitoring of the status of sensors and components, easy conversion in any drilling arrangement, friendly customization of working functions e.g. mappings of torque and speed for EP rotary head, remote rigs assistance, diagnostic, monitoring of working parameters.

Technical Data

Mast
Stroke of rotary head 8000 ÷ 10000 mm
Clamps
Diameters 76 ÷ 610 mm
Rotary head
Torque 70000 Nm
Max. drilling speed 50 rpm
Weight
Weight in working condition 25000 kg

 

Optional equipmet

  • Other rotary heads available
  • Drifter T40 (Back Device)
  • Rotopercussion unit HB50A, HB60A
  • A2 auxiliary winch with rope Max line pull 2000 kg
  •  Cathead for auxiliary winch A2
  •  Self-pivot pulley Cathead with self-pivoting pulley for auxiliary winch A2
  • Auxiliary crane
  • Jet grouting system
  • Super jet grouting arrangement
  •  Hydraulic chuck type P114 – P200 for jet grouting rods
  • lushing pump-Water pump GAMMA 202 (200 l/min max – 60 bar max)
  •  Foam pump G40 (30 l/min max – 50 bar max)
  • Lubricator for down-the-hole hammer 8,5 l | 20 l
  •  Mud pump NG 530 L / NG 60
  •  High pressure pump cleaner
  • Safeguards according to EN 16228
  • Casagrande Live Dashboard remote rig control and monitoring via internet

Contact Us